Fagor 101 / 101S / 102 / 102S programming G codes / M codes complete lists.
Fagor 101/102 Introduction
The FAGOR 101/102 CNC may be integrated into the machine’s electrical cabinet and it gathers, in a single unit, all the most powerful and simple operating characteristics of a 1 or 2-axis CNC.
The FAGOR 101/102 CNC excels for being adaptable to multiple applications thanks to its 120 machine parameters. The flexibility and great managing capability of these CNCs make them ideal for a great variety of applications.
G Codes
| G Codes | Description |
|---|---|
| G00 | Rapid positioning |
| G01 | Linear interpolation |
| G02 | Clockwise circular interpolation |
| G03 | Counter-clockwise circular interpolation |
| G04 | Dwell |
| G05 | Round corner |
| G07 | Square corner |
| G25 | Unconditional jump |
| G26 | Jump if zero |
| G27 | Jump if not zero |
| G28 | Jump if less than zero |
| G29 | Jump if equal or greater than zero |
| G33 | Synchronization |
| G34 | Axis X as infinite slave of another axis. |
| G45 | Increment parts counter |
| G47 | Feedback pulse inhibit Open the position loop of the axes. |
| G48 | Cancel function G47 Close the position loop of the axes. |
| G51 to G60 | Load zero offsets |
| G60 | Load the dimensions of the punch. |
| G61 | F not affected by “P18” |
| G62 | Cancel function G61 |
| G70 | Inch programming |
| G71 | Metric programming |
| G74 | Home search |
| G75 | Probing |
| G81 | Batch programming |
| G84, G80 | Rigid tapping |
| G90 | Absolute programming |
| G91 | Incremental programming |
| G92 | Coordinate preset |
| G93 | Modify acceleration ramp |
M Codes
| M Codes | Description |
|---|---|
| M00 | Program stop |
| M01 | Conditional stop of program |
| M02 | End of program |
| M30 | End of program with return to beginning |
| M03 | Clockwise start of the spindle |
| M04 | Counter-clodwise start of the spindle |
| M05 | Spindle stop |
| M41,M42,M43,M44 | Spindle range selection |
