Selca G74 Rounding off in the ±180° range for rotary axes
G74 [A] [B] [C]
| Parameter | Description |
|---|---|
| A, B, C | name of the rotary axis where to apply the rounding. |
Enabled: only in the block in which it is programmed.
Note: for angles > 360°.
Selca G774 Roll-Over rotary axes (only for S4000 Series CNCs) Programming G774 [A] [B] [C] [D0=…] [D1=…] Parameters Parameter Description A, B,C name of the rotary axis where to apply…
Selca G773 Cancels management Roll-Over axes (only for S4000 Series CNCs) Programming G773
Selca G14 G15 MASTER-SLAVE axes (Only with Master-Slave option) G14 Cancels MASTER-SLAVE axes G14 Cancels MASTER-SLAVE axes (G15) (Only with Master-Slave option) Programming G14 G15 MASTER-SLAVE axes G15 MASTER-SLAVE axes…
Selca CNC 4000/3000 Series control G-Functions/ G-codes for cnc machinists who work on cnc machines with Selca cnc controls. These Selca G Functions work on following Selca cnc controls, Selca…
Okuma G76 Rounding Okuma G76 G Code is used for Rounding the sharp edge. G76 is effective only in the G01 mode. G76 is non-modal and active only in the commanded…
For a brief description of how Chamfer and Corner Radius are programmed with G01 G code read following cnc programming article Chamfer and Radius Programming with G01 G code. You…
Haas Corner Rounding and Chamfering Haas CNC program example to show how Chamfer and Corner Radius can be programmed. Haas Chamfering To program Chamfer N10 G01 X20 Y30 ,C3 Haas…
O00025 T2 M06 (.5 END MILL) (D=.5) G00 G90 G54 X-1.5 Y0 S5000 M03 G43 H02 Z1. M08 G01 Z-0.5 F80. G01 G41 D02 Y-0.5 F80. G03 X-1. Y0 R0.5…
O0001; N1; G50 S1500; G00 T0101; G96 S200 M03; X30.0 Z20.0 M08; G01 Z0 F1.0; X0 F0.2; G00 X20.0 Z1.0; G01 Z−20.0, C1.0; X40.0 , R1.0; Z−40.0 , R2.0; X60.0…
0 BEGIN PGM 10104 MM 1 BLK FORM 0.1 Z X-50 Y-50 Z-40 2 BLK FORM 0.2 X+50 Y+50 Z+0 3 TOOL DEF 1 4 TOOL CALL 1 Z S1000…
Mitsubishi CNC Corner Chamfering / Corner Rounding On machining centers with Mitsubishi CNC the Chamfering at any angle or corner rounding is performed automatically by adding “,C_” or “,R_” to…
Rotary Broaching, also known as wobble broaching, is a fast and accurate method for producing internal and external forms in the end of the work piece. The broaching tool holder can…
CNC lathe machines work at low spindle speeds like 100 ~ 200 RPMs, and sometimes CNC lathe machines work at 5000 RPMs. This all speed selection is component operation dependent….
CNC machining with 5000 RPMs and with high coolant pressure, what else a cnc machinist want, CLEAR VIEW of what is happening inside machine. Yes of course due to high…
N1 [PROFILE 5 N2 $1M0X-54.8I205.Y-83.4J82.8 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I5 N8 Z100R N9 X50Y-80R N10 Z2R N11 Z-10 N12 G42K2 N13 G13Y-70J0 N14 G21I30 N15…
N1 [PROFILE 11 N2 $1M0X-158.I155.Y-84.6J115. N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 Z100R N8 X0Y-70R N9 Z2R N10 Z-10 N11 G49I5 N12 G41K2 N13 G20X0Y0I-52.5 N14 G21I15 N15…
[G13 Straight line, at a known angle, [ through a point or tangent to a circle [G20 Circle of known center and radius [G21 Linking radius [G51 Offset / rotation…
N1 [PROFILE 9 N2 $1M0X-116.I119.Y-45.3J105. N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 Z100R N8 X0Y0R N9 Z2R N10 Z-10 N11 G49I2.5 N12 G42K2 N13 E1=G20X25Y-32I-12 N14 E2=G20X-65Y21I-12 N15…
N1 [PROFILE 2 N2 $1M0X-82.9I125.Y-63.9J69.1 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I2 N8 Z100R N9 X35Y25R N10 Z2R N11 Z-10 N12 G41K2 N13 G13Y15J0 N14 G21I-20 N15…
Selca G67 G68 G69 Static TCPM G67 Cancels G68/G69 G67 Cancels G68/G69 static TCPM Programming G67 G68 Static TCPM for rotary tables G68 Static TCPM for rotary tables Programming G68…
