Selca G817 Tool length offset on an axis non-orthogonal to the machining plane

Selca G52 Offset of the coordinate system on the plane Programming G52 [X…] [Y…] [Z…] [I] Parameters Parameter Description X, Y, Z coordinates of the new origin with respect to…

Selca G50 G51 Offset / rotation of the coordinate system on the plane G50 Cancels the offset/rotation G50 Cancels the offset / rotation function G51 Programming G50 G51 Offset /…

Selca G48 Recalls and enables tool length compensation Programming G48 [K…] [I…] Parameters Parameter Description K compensation number. I finish stock value. Note: program G48 I0 to disable the active…

Selca G736 Surfaces defined by a plane profile and one or more section profiles: plane profile and parameters Programming G736 I… [X… Y…] [J…] [K…] [Q…] [D0=…] [D1=…] [D2=…] [D3=…]…

Selca G740 G746 G748 G749 4-axis surface machining G740 Cancels G748 and G749 G740 Cancels G748 and G749 Programming G740 G746 Defers G748 cycle G746 Defers G748 cycle Programming G746…

Selca G845 G846 Manual axis control by handwheels during machining G845 Cancels G846 G845 Cancels G846 Programming G845 Enabled: only in the block in which it is programmed. G846 Manual…

Selca G17 G18 G19 Plane selection G17 Plane selection XY G17 Plane selection (XY is the machining plane, Z is the perpendicular axis) Programming G17 Enabled: (default) until aG16, aG18,…

Selca G88 Spaced plane drilling fixed cycle Programming G88 [X… Y…] Z… J… [K…] [F…] [D8=…] Parameters Parameter Description X,Y hole coordinates. Z first wall depth. J drilling starting plane…

Selca G877 Limits, mode and copying plane Programming G877 PLANE K… J… Parameters Parameter Description PLANE plane on which the polygon defining the copying area limits lies (XY or YZ…

Selca G738 Surfaces defined by a plane profile and one or more section profiles: execution Programming G738 [J…] [X… Y…] Parameters Parameter Description J with D0=1 in function G736, distance…

Selca G53 G54 G55 G56 G57 G58 G59 Mirror machining G53 Cancels mirror machining G53 Cancels mirror machining Programming G53 G54 X-mirror machining G54 X-mirror machining (change sign to X…

G43 Tool Length Compensation positive With G43 a value from the offset register (OFFSET) can be called up and added to tool length. To all following Z movements (with active…

Selca Grid pattern machining cycles Parameters Parameter Description X,Y coordinates of the first hole. D1= number of holes per line. D2= distance between holes on the line. D3= angle formed…

Manual operation in which a reference tool and the tool to be measured are pressed against a fixed point on the machine, one after the other, and the difference in length between…

Compensating for the difference in length between the tool assumed during programming and the tool to be used for actual machining.

Selca G797 Circumference pattern machining repeat Programming G797 X… Y… D1=… D2=… [D3=…] [D4=…] [D5=…] Parameters Parameter Description X,Y circumference center coordinates. D1= number of figures. D2= circumference radius with…

N1 [PROFILE 3 N2 $1M0X-105.I103.Y-63.7J69.3 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 Z100R N8 X-20Y27R N9 Z2R N10 Z-10 N11 G49I2 N12 G41K2 N13 L=1 N14 G20X0Y0I-25 N15…

Selca G787 Grid pattern machining repeat supercycle Programming G787 X… Y… [D1=…] [D2=…] [D3=…] [D4=…] [D5=…] [D6=…] [D7=…] Parameters Parameter Description X,Y starting point coordinates. D1= number of figures per…

Selca G41 Enables tool radius compensation, tool left of profile Programming G41 [K…] [I1] [Q…] [D0=…] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach with…

Selca G750 G751 Rotation / offset in space G750 Cancels G751 G750 Cancels G751 Programming G750 G751 Rotation/offset in space G751 Rotation/offset in space Programming G751 [TRS X…] [TRS Y…]…