Selca G879 Closing of limit definition
G879 [I...] [J...] [Q...]
| Parameter | Description |
|---|---|
| I | probe axis upper limit in copying mode 5. |
| J | probe axis lower limit in copying mode 5. |
| Q | pass angle for inclined copying (J1, J2, J3 and J4 copying modes). |
Selca G910 G911 Disables travel limit control G910 Cancels G911 G910 Cancels G911 Programming G910 G911 Disables travel limit control G911 Disables travel limit control Programming G911 The block containing…
See “Stored stroke check”
Stroke limit check performed before the movement specified in a block is started.
Selca G62 Type of coordinates for the definition of circle center in G2/G3 Programming G62 K… Parameters Parameter Description K type of coordinates. K1 absolute coordinates. K2 incremental coordinates, with…
Selca CNC 4000/3000 Series control G-Functions/ G-codes for cnc machinists who work on cnc machines with Selca cnc controls. These Selca G Functions work on following Selca cnc controls, Selca…
N1 [PROFILE 5 N2 $1M0X-54.8I205.Y-83.4J82.8 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I5 N8 Z100R N9 X50Y-80R N10 Z2R N11 Z-10 N12 G42K2 N13 G13Y-70J0 N14 G21I30 N15…
N1 [PROFILE 11 N2 $1M0X-158.I155.Y-84.6J115. N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 Z100R N8 X0Y-70R N9 Z2R N10 Z-10 N11 G49I5 N12 G41K2 N13 G20X0Y0I-52.5 N14 G21I15 N15…
[G13 Straight line, at a known angle, [ through a point or tangent to a circle [G20 Circle of known center and radius [G21 Linking radius [G51 Offset / rotation…
N1 [PROFILE 6 N2 $1M0X-110.I150.Y-82.4J83.7 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I1 N8 Z100R N9 X-75Y-75R N10 Z2R N11 Z-10 N12 G42K2 N13 E1=G13X0Y-80J180 N14 E1 N15…
N1 [PROFILE 9 N2 $1M0X-116.I119.Y-45.3J105. N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 Z100R N8 X0Y0R N9 Z2R N10 Z-10 N11 G49I2.5 N12 G42K2 N13 E1=G20X25Y-32I-12 N14 E2=G20X-65Y21I-12 N15…
N1 [PROFILE N2 $1M0X-119.I124.Y-44.2J111. N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I5 N8 Z100R N9 X0Y-40R N10 Z2R N11 Z-10 N12 G42K2 N13 G20X0Y0I29 N14 G13X0Y0J-30K2 N15 E1=G20X0Y0I68…
N1 [PROFILE 2 N2 $1M0X-82.9I125.Y-63.9J69.1 N3 G17 N4 O1 N5 T1 N6 F1000S1200M3 N7 G49I2 N8 Z100R N9 X35Y25R N10 Z2R N11 Z-10 N12 G41K2 N13 G13Y15J0 N14 G21I-20 N15…
Selca G04 Timed dwell Programming G04 K… Parameters Parameter Description K Pause time in units of tenths of a second.
Selca G16 Axis exchange Programming G16 Axis1 Axis2 Axis3 Parameters Parameter Description Axis1 Axis exchanged with the first machine axis. Axis2 Axis exchanged with the second machine axis. Axis3 Axis…
Selca G17 G18 G19 Plane selection G17 Plane selection XY G17 Plane selection (XY is the machining plane, Z is the perpendicular axis) Programming G17 Enabled: (default) until aG16, aG18,…
Selca G53 G54 G55 G56 G57 G58 G59 Mirror machining G53 Cancels mirror machining G53 Cancels mirror machining Programming G53 G54 X-mirror machining G54 X-mirror machining (change sign to X…
Selca G67 G68 G69 Static TCPM G67 Cancels G68/G69 G67 Cancels G68/G69 static TCPM Programming G67 G68 Static TCPM for rotary tables G68 Static TCPM for rotary tables Programming G68…
Selca G77 Polygonal pocket Programming G77 X… Y… [I…] [J…] [K…] [D0=…] [D1=…][D2=…] [D3=…] [D4=…] [D6=…] [D7=…] [D8=1] [D9=…] Parameters Parameter Description X,Y first point of the pocket. I stock…
Selca G01 Linear interpolation Programming G01 Axis Enabled: (default) until a G02 or a G03 is programmed.
Selca G09 Deceleration at block end Programming G09 X… Y… Z… Enabled: only in the block in which it is programmed.
