Sinumerik POCKET1 Rectangular Pocket Milling

Sinumerik POCKET1 Rectangular pocket milling

With Sinumerik POCKET1 cycle, rectangular pockets can be produced in any location in the machining plane.
Sinumerik POCKET1 cycle is a combined roughing/finishing cycle.

Programming

POCKET1 (RTP, RFP, SDIS, DP, DPR, LENG, WID,
        CRAD, CPA, CPO, STA1, FFD, FFP1, MID, CDIR, FAL,
        VARI, MIDF, FFP2, SSF)

Sinumerik POCKET1 Rectangular pocket milling

Parameters

ParameterDescription
RTPReturn plane (absolute)
RFPReference plane (absolute)
SDISSafety distance (enter without sign)
DPFinal drilling depth/elongated hole depth/slot depth/pocket depth (absolute)
DPRFinal drilling depth/elongated hole depth/slot depth/pocket depth relative to reference plane (enter without sign)
LENGLength of elongated hole/slot length/pocket length (without sign)
WIDSlot width/pocket width (enter without sign)
CRADCorner radius (enter without sign)
CPACenter point circle/pocket, abscissa (absolute)
CPOCenter point circle/pocket, ordinate (absolute)
STA1Starting angle, values: -180 to 180 degrees
FFDFeedrate for depth infeed
FFP1Feedrate for surface machining
MIDMaximum insertion depth for insertion (enter without sign)
CDIRDirection of machining Values:
2 (for G2)
3 (for G3)
FALCorrect finishing allowance for contour (enter without sign)
VARIMachining mode
0=complete machining
1=solid machining to finishing allowance
2=only machining of finishing allowance
MIDFMaximum insertion depth for final allowance
FFP2Feedrate for final allowance
SSFSpeed during finishing