Selca G840 G841 Tool radius compensation in space

Selca G41 Enables tool radius compensation, tool left of profile Programming G41 [K…] [I1] [Q…] [D0=…] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach with…

Selca G42 Enables tool radius compensation, tool right of profile Programming G42 [K…] [I1] [Q…] [D0=1] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach with…

Selca G43 G44 Paraxial radius compensation G43 G43 Paraxial radius compensation: the compensation is added to the coordinate Programming G43 [X…] [Y…] Enabled: only in the block in which it…

Selca G48 Recalls and enables tool length compensation Programming G48 [K…] [I…] Parameters Parameter Description K compensation number. I finish stock value. Note: program G48 I0 to disable the active…

Selca G750 G751 Rotation / offset in space G750 Cancels G751 G750 Cancels G751 Programming G750 G751 Rotation/offset in space G751 Rotation/offset in space Programming G751 [TRS X…] [TRS Y…]…

Selca G872 ON /OFF touch probe measuring cycle in space Programming G872 [X…] [Y…] [Z…] [I…] [F…] [R] Parameters Parameter Description X,Y,Z expected coordinates of the point to be measured….

Selca G873 Touch /copying probe measuring cycle in space Programming G873 [X…] [Y…] [Z…] [I…] [F…] [R] Parameters Parameter Description X,Y,Z expected coordinates of the point to be measured. I…

Cutter Radius Compensation Example program shows how G41, G40 can be used in a cnc mill program. Cutter Compensation code used in this program are, G41 Cutter Radius Compensation Left…

CNC Milling programming example code with drawing, which shows how G41 Cutter Radius Compensation Left is used in a cnc mill program. CNC Mill Program (G41 Cutter Radius Compensation Left)…

Selca G25 G26 Axis reversal compensation G25 Cancels G26 G25 Cancels G26 Programming G25 G26 Axis reversal compensation (default on) G26 Axis reversal compensation (default on) Programming G26

Selca G40 Exit from profile and cutter compensation disable Programming G40 [K…] [X… Y…] Parameters Parameter Description K selects profile exit mode: K1: automatic profile exit with a straight line…

Selca G20 Circle of known center and radius Programming G20 [X… Y…] [I…] [K…] Parameters Parameter Description X,Y Circle center coordinates. May be omitted if coinciding with the center of…

Selca G21 Chamfer G21 Chamfer Programming G21 J… Parameters Parameter Description J Chamfer value (distance from the vertex). Selca G21 Linking radius Selca G21 Linking radius Programming G21 [I…] Parameters…

G49 Defines cylindrical mill radius Selca G49 Defines cylindrical mill radius Programming G49 Kn [I…] Parameters Parameter Description Kn recall cutter compensation (n). I finish stock value. Programming G49 I……

Selca G98 G99 Drift compensation (compensates for position offsets caused by servo drives) G98 Cancels G99 G98 Cancels G99 Programming G98 G99 Drift compensation G99 Drift compensation (compensates for position…

G43 Tool Length Compensation positive With G43 a value from the offset register (OFFSET) can be called up and added to tool length. To all following Z movements (with active…

Compensating for the difference in length between the tool assumed during programming and the tool to be used for actual machining.

Selca G701 Defines tool approach to profiled pockets Programming G701 [X… Y…] Parameters Parameter Description X, Y profile approach and exit point.

Selca G9999 Synchronization of program execution with tool path display Programming G9999 Enabled: only in the block in which it is programmed.

Selca G83 Deep drilling fixed cycle with tool retraction for chip discharge Programming G83 [X… Y…] Z… J… I… [Q…] [K…] [F…] [D0=…] [D7=1] [D8=…] [D9=1] Parameters Parameter Description X,Y…