Selca G93 Feed rate defined as inverse of block execution time

Selca G738 Surfaces defined by a plane profile and one or more section profiles: execution Programming G738 [J…] [X… Y…] Parameters Parameter Description J with D0=1 in function G736, distance…

Selca G92 F-feed rate override Programming G92 F Parameters Parameter Description F the new feed rate overrides all F functions programmed in the subsequent blocks. Enabled: until a G92 or a…

Selca G95 F-feed rate in mm/rev or inches/rev Programming G95 F… Parameters Parameter Description F new feed rate. Enabled: until a G92 or a G93 G94 G95 with new F-values…

Selca G94 F-feed rate in mm/min or inches/min Programming G94 F… Parameters Parameter Description F new feed rate. Enabled: until a G92 or a G93 G94 G95 with new F-values…

Selca G734 Spiral milling: execution Programming G734

Selca G728 Ruled surfaces between two profiles: execution Programming G728 [TRS [X…] [Y…] [Z…]] [ROTX…] [ROTY…] [ROTZ…] Parameters Parameter Description TRS X X – axis offset by a given value….

Selca G1000 G1001 Graphic execution of a program sequence G1000 Cancels G1001 G1000 Cancels G1001 Programming G1000 G1001 Graphic execution of a program sequence G1001 Graphic execution of a program…

Selca G780 Grid/circumference pattern machining repeat: execution Programming G780

Selca G900 G901 Edit and graphic execution disabling during machining G900 Cancels G901 G900 Cancels G901 Programming G900 G901 Edit and graphic execution disabling during machining G901 Edit and graphic…

Selca G9999 Synchronization of program execution with tool path display Programming G9999 Enabled: only in the block in which it is programmed.

Selca G730 G731 High speed milling of profiles defined by points G730 Cancels G731 G730 Cancels G731 (Only for S3000 Series CNCs) Programming G730 G731 High speed milling of profiles…

Selca G30 G31 Continuous motion mode with automatic feed adjustment G30 Cancels G31 G30 Cancels G31 and re-establishes deceleration at block end Programming G30 Enabled: until aG31 is programmed. G31…

Selca G732 G733 High speed milling of profiles defined by points with S speed ramp G732 Cancels G733 G732 Cancels G733 Programming G732 G733 High speed milling of profiles G733…

Selca G736 Surfaces defined by a plane profile and one or more section profiles: plane profile and parameters Programming G736 I… [X… Y…] [J…] [K…] [Q…] [D0=…] [D1=…] [D2=…] [D3=…]…

Selca G737 Surfaces defined by a plane profile and one or more section profiles: section profiles Programming G737 [Q…] [K1] Parameters Parameter Description Q number of the section profile (fromQ1to…

Selca G09 Deceleration at block end Programming G09 X… Y… Z… Enabled: only in the block in which it is programmed.

Selca G997 G998 Block sequence number check G997 Cancels G998 G997 Cancels G998 (Only for S3000 Series CNCs) Programming G997 G998 Block sequence number check G998 Block sequence number check…

Selca CNC 4000/3000 Series control G-Functions/ G-codes for cnc machinists who work on cnc machines with Selca cnc controls. These Selca G Functions work on following Selca cnc controls, Selca…

Feed Per Revolution (G95) G95 (Feed Per Revolution) is a modal G-code that instructs the control to interpret feed commands as mm per revolution (mm/rev) or inches per revolution of the spindle. G01 F0.02…

Feed Per Minute (G94) G94 G-code is a modal G-code. G94 instructs the control to interpret feed commands as inches/minute or mm/minute for linear moves. degrees/minute for rotary moves. inches/minute or mm/minute…