Selca G48 Recalls and enables tool length compensation

Selca G41 Enables tool radius compensation, tool left of profile Programming G41 [K…] [I1] [Q…] [D0=…] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach with…

Selca G42 Enables tool radius compensation, tool right of profile Programming G42 [K…] [I1] [Q…] [D0=1] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach with…

G43 Tool Length Compensation positive With G43 a value from the offset register (OFFSET) can be called up and added to tool length. To all following Z movements (with active…

Compensating for the difference in length between the tool assumed during programming and the tool to be used for actual machining.

Selca G817 Tool length offset on an axis non-orthogonal to the machining plane Programming G817 Axis Parameters Parameter Description Axis name of the machine axis to which the compensation is…

Selca G840 G841 Tool radius compensation in space G840 Cancels G841 G840 Cancels G841 Programming G840 G841 Tool radius compensation in space G841 Tool radius compensation in space Programming G841…

Selca G36 G37 Enables storing of actual machine axis path G36 G36 Disables storing of actual machine axis path Programming G36 G37 G37 Enables storing of actual machine axis path…

Selca G25 G26 Axis reversal compensation G25 Cancels G26 G25 Cancels G26 Programming G25 G26 Axis reversal compensation (default on) G26 Axis reversal compensation (default on) Programming G26

Selca G43 G44 Paraxial radius compensation G43 G43 Paraxial radius compensation: the compensation is added to the coordinate Programming G43 [X…] [Y…] Enabled: only in the block in which it…

Selca G40 Exit from profile and cutter compensation disable Programming G40 [K…] [X… Y…] Parameters Parameter Description K selects profile exit mode: K1: automatic profile exit with a straight line…

Manual operation in which a reference tool and the tool to be measured are pressed against a fixed point on the machine, one after the other, and the difference in length between…

Selca G98 G99 Drift compensation (compensates for position offsets caused by servo drives) G98 Cancels G99 G98 Cancels G99 Programming G98 G99 Drift compensation G99 Drift compensation (compensates for position…

Selca G701 Defines tool approach to profiled pockets Programming G701 [X… Y…] Parameters Parameter Description X, Y profile approach and exit point.

Selca G9999 Synchronization of program execution with tool path display Programming G9999 Enabled: only in the block in which it is programmed.

Selca G83 Deep drilling fixed cycle with tool retraction for chip discharge Programming G83 [X… Y…] Z… J… I… [Q…] [K…] [F…] [D0=…] [D7=1] [D8=…] [D9=1] Parameters Parameter Description X,Y…

Selca G783 Grid pattern deep drilling with tool retraction for chip discharge supercycle Programming G783 X… Y… Z… J… I… [Q…] [K…] [F…] D1=… D2=… [D0=…] [D3=…] [D4=…] [D5=…] [D6=…]…

Selca G793 Circumference pattern deep drilling with tool retraction for chip discharge supercycle Programming G793 X… Y… Z… J… I… [Q…] [K…] [F…] D1=… D2=… [D0=…] [D3=…] [D4=…] [D5=…] [D7=1]…

Selca CNC 4000/3000 Series control G-Functions/ G-codes for cnc machinists who work on cnc machines with Selca cnc controls. These Selca G Functions work on following Selca cnc controls, Selca…

When doing any operation on a lathe, all parameters are critical and should not be overlooked. There are industry standards and recommendations for SFM, feedrates, insert geometry, workholding, etc., that…

;The main program would call this macro five times, ;each time specifying the depth and length required. ;macro variables would handle the length in the Y direction ;and depth in…