Selca G Code Reference

Selca G35 Ends programming of the profile delimiting the zone of ruled surface to be machined Programming G35

Selca G34 Opens programming of the profile delimiting the zone of ruled surface to be machined Programming G34 [I0] Parameters Parameter Description I0 the delimitation profile is not offset by…

Selca G32 End of internal subroutine and return to the main program Programming G32

Selca G30 G31 Continuous motion mode with automatic feed adjustment G30 Cancels G31 G30 Cancels G31 and re-establishes deceleration at block end Programming G30 Enabled: until aG31 is programmed. G31…

Selca G29 Last point of a SPLINE curve Programming G29 X… Y… [Q…] Parameters Parameter Description X, Y Coordinate of the last point of the curve. Q Angle on the…

Selca G28 Cusp point of a SPLINE curve Programming G28 Enabled: only in the block in which it is programmed.

Selca G27 First point of a SPLINE curve linking a series of at least 5 points Programming G27 X… Y… [I…] [Q…] [D1=1] Parameters Parameter Description X, Y Coordinates of…

Selca G25 G26 Axis reversal compensation G25 Cancels G26 G25 Cancels G26 Programming G25 G26 Axis reversal compensation (default on) G26 Axis reversal compensation (default on) Programming G26

Selca G17 G18 G19 Plane selection G17 Plane selection XY G17 Plane selection (XY is the machining plane, Z is the perpendicular axis) Programming G17 Enabled: (default) until aG16, aG18,…

Selca G21 Chamfer G21 Chamfer Programming G21 J… Parameters Parameter Description J Chamfer value (distance from the vertex). Selca G21 Linking radius Selca G21 Linking radius Programming G21 [I…] Parameters…

Selca G20 Circle of known center and radius Programming G20 [X… Y…] [I…] [K…] Parameters Parameter Description X,Y Circle center coordinates. May be omitted if coinciding with the center of…

Selca G16 Axis exchange Programming G16 Axis1 Axis2 Axis3 Parameters Parameter Description Axis1 Axis exchanged with the first machine axis. Axis2 Axis exchanged with the second machine axis. Axis3 Axis…

Selca G14 G15 MASTER-SLAVE axes (Only with Master-Slave option) G14 Cancels MASTER-SLAVE axes G14 Cancels MASTER-SLAVE axes (G15) (Only with Master-Slave option) Programming G14 G15 MASTER-SLAVE axes G15 MASTER-SLAVE axes…

Selca G13 Straight line, at a known angle, through a point or tangent to a circle Programming G13 X… Y… [I…] J… [K…] Parameters Parameter Description X,Y Point or circle…

Selca G11 Second point or Circle that defines a straight line Programming G11 X… Y… [I… K…] Parameters Parameter Description X,Y Circle center or supporting point coordinates. I Circle radius…

Selca G10 First point or circle that defines a straight line Programming G10 X… Y… [I…] Parameters Parameter Description X,Y Circle center or supporting point coordinates. I Circle radius (omitted…

Selca G04 Timed dwell Programming G04 K… Parameters Parameter Description K Pause time in units of tenths of a second.

Selca G03 Counterclockwise Circular / Helical Interpolation Programming G03 X… Y… I… J… [Z…] G03 X… Z… I… K… [Y…] G03 Y… Z… J… K… [X…] Parameters Parameter Description X Y…

Selca G02 Clockwise Circular / Helical Interpolation Programming G02 X… Y… I… J… [Z…] G02 X… Z… I… K… [Y…] G02 Y… Z… J… K… [X…] Parameters Parameter Description X…