Milltronics G Code for CNC machinists who work on CNC lathe machines with Milltronics CNC controls.
You might read G codes for Milltronics Centurion 7 CNC control Milltronics Centurion 7 G Code List
Milltronics CNC Control
Milltronics G Code for Lathes
| G Code | Function |
|---|---|
| G00 | Rapid Positioning |
| G01 | Linear Interpolation |
| G02 | Circular/Helical Interpolation CW |
| G03 | Circular/Helical Interpolation CWW |
| G04 | Dwell |
| G09 | Exact Stop |
| G10 | Set Data On |
| G11 | Set Data Off |
| G12 | Clear Floating Zero |
| G13 | Back Side Programming |
| G14 | Front Side Programming |
| G20 | Inch Input |
| G21 | Metric Input |
| G22 | Safe Zone Check Off |
| G23 | Safe Zone Check On |
| G28-G30 | Reference Point Return |
| G32 | Threading |
| G34-G36 | Threading |
| G38 | Initial Point Return |
| G39 | R-Plane Return |
| G40 | Cutter Compensation Cancel |
| G41 | Cutter Compensation Left |
| G42 | Cutter Compensation Right |
| G45 | Z to Clearance |
| G46 | X to Clearance |
| G47 | Z to Tool Change |
| G48 | X to Tool Change |
| G49 | Cancel H Offset |
| G50 | Set FLZ, Max RPM’s |
| G52 | Local Coordinate System Set |
| G53 | Machine Coordinate System |
| G54 | Work Coordinate 1 System (G540…G549) |
| G55-G59 | Work Coordinate 2-6 System (G5#0…5#9) |
| G60 | One-Shot Rapid |
| G61 | Exact Stop Mode |
| G63 | Tapping Mode |
| G64 | Cutting |
| G65 | Non-movement |
| G70 | Finish Cycle |
| G71 | Rough Turning |
| G72 | Rough Facing |
| G73 | Pattern Repeat |
| G74 | Face Grooving |
| G75 | Diameter Grooving |
| G76 | Threading Cycle |
| G80 | Cancel Canned Cycle |
| G81 | Drill |
| G82 | Drill / Dwell |
| G83 | Peck / Drill |
| G84 | Tap |
| G85 | Bore |
| G86 | Bore / Spindle Stop |
| G89 | Bore / Dwell |
| G90 | Turning Cycle A |
| G91 | Incremental Dimension |
| G92 | Thread Cutting Cycle |
| G93 | Absolute |
| G94 | Facing Cycle B |
| G96 | Constant Surface Speed |
| G97 | Revs per Minute |
| G98 | Feed per Minute |
| G99 | Feed per Rev |
| G501 | Mirror Image Off |
| G511 | Mirror Image On |
| G550 | Scaling Off |
| G551 | Scaling On |
| G568 | Rotation On |
| G569 | Rotation off |
| G990 | Store Parameters |
| G991 | Read Parameters |
| G995 | Read Byte Parameters |
| G996 | Set Byte Parameters |
| G997 | Force Error |
| G998 | Beep |
| G999 | Force Fatal Error |
