Sinumerik Alarm 61309 Channel %1 block %2 check measuring probe type
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Measuring probe type: 3D-probe inactive.
Reactions:
– Interpreter stop
– NC Start disable in this channel.
– Interface signals are set.
– Alarm display.
Remedy:
The measuring probe has to be of the “3D-probe” type in the tool management.
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens