Haas Setting 118 M99 Bumps M30 CNTRS


Haas Setting 118 M99 Bumps M30 CNTRS

Haas Setting Description
When this setting is ON, an M99 will add one to the M30 counters (these are visible on the CURNT COMNDS displays). Note that an M99 will only increase the counters as it occurs in a main program, not a sub-program.

References

  1. Haas Lathe Operator’s Manual by Haas Automation, Inc.
  2. Haas Mill Operator’s Manual by Haas Automation, Inc.
Haas Setting 118 M99 Bumps M30 CNTRS