Okuma Alarm-D 4847 Interference area intrusion


Okuma Alarm-D 4847 Interference area intrusion

Code
None->The spindle is entering the interference range.
1->ZB-axis feed command was issued in interference area when XB-axis is not in pulse limit position.
2->ZB-axis feed command was issued in interference area when B-turret does not index permission pot number.
3->ZA-axis feed command was issued in interference area when A-turret does not index permission pot number.
4->The turret is entering the interference range.
5->The work rest is entering the interference range.

Okuma Alarm-D 4847 Interference area intrusion