Okuma Alarm-B 2381 LAP U(W) > H


Okuma Alarm-B 2381 LAP U(W) > H
In G88 LAP mode, designated finish allowance U or W is larger than the thread height H.
G88: Calls continuous thread cutting cycle.

Object
SYSTEM

Probable Faulty Locations
Program error
Program Example:

N010 G88 NLAP1 M32 M73 B60 H10 D2 U20

Measures to Take
Check the U and H commands.
In the example program, U command value is greater than H command value (U H); correct either or both of these command values.

N010 G88 NLAP1 M32 M73 B60 H10 D2 U0.2

Related Specifications
LAP

Okuma Alarm-B 2381 LAP U(W) > H