Okuma Alarm-P 0801 TCP/IP board detected error
During activation of DNC-T1, T2, T3,or DT function, a CPU error occurred on TCP/IP board
Index
None
Character-string
None
Code
XXYYZZ
XX…Board status in hexadecimal
| bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 |
|---|---|---|---|---|---|---|---|
| RUN | HALT | CPUOFF | 0 | SNMI | 0 | 0 | 0 |
YY…Bus error status in hexadecimal
| bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 |
|---|---|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | PROT | DAI | LOOP | ECC |
ZZ…Always 0
Probable Faulty Locations
1.Hardware error on TCP/IP board
2.Software error on TCP/IP firmware