Fanuc Alarms

Fanuc Alarms and Errors e.g. Program errors (P/S alarm), Over travel alarms, Servo alarms etc.

Fanuc Alarm 1330 ILLEGAL SPINDLE NUMBER

Fanuc Alarm 1330 ILLEGAL SPINDLE NUMBER Fanuc Alarm Description An spindle No. address exceeding the maximum number of controlled spindles was found while loading parameters from a tape or by…

Fanuc Alarm 1331 ILLEGAL PATH NUMBER

Fanuc Alarm 1331 ILLEGAL PATH NUMBER Fanuc Alarm Description An path No. address exceeding the maximum number of controlled path was found while loading parameters from a tape or by…

Fanuc Alarm 1142 TOO LONG V-NAME (SETVN)

Fanuc Alarm 1142 TOO LONG V-NAME (SETVN) Fanuc Alarm Description The variable name used in a SETVN statement in a custom macro exceeds 8 characters.

Fanuc Alarm 1306 MISSING AXIS NUMBER

Fanuc Alarm 1306 MISSING AXIS NUMBER Fanuc Alarm Description A parameter which requires an axis to be specified was found without an axis No. (address A) while loading parameters from…

Fanuc Alarm 1143 BPRNT/DPRNT STATEMENT FORMAT ERROR

Fanuc Alarm 1143 BPRNT/DPRNT STATEMENT FORMAT ERROR Fanuc Alarm Description The format used in the BPRINT statement or DPRINT statement is in error.

Fanuc Alarm 1307 ILLEGAL USE OF MINUS SIGN

Fanuc Alarm 1307 ILLEGAL USE OF MINUS SIGN Fanuc Alarm Description Data with an illegal sign was found while loading parameters or pitch error compensation data from a tape, or…

Fanuc Alarm 1144 G10 FORMAT ERROR

Fanuc Alarm 1144 G10 FORMAT ERROR Fanuc Alarm Description Data input for the L No. of G10 or the corresponding function is not enabled. Data setting address P or R…

Fanuc Alarm 1308 MISSING DATA

Fanuc Alarm 1308 MISSING DATA Fanuc Alarm Description An address not followed by a numeric value was found while loading parameters or pitch error compensation data from a tape.

Fanuc Alarm 1160 COMMAND DATA OVERFLOW

Fanuc Alarm 1160 COMMAND DATA OVERFLOW Fanuc Alarm Description An overflow occurred in the position data within the CNC. This alarm is also generated if the target position of a…

Fanuc Alarm 1180 ALL PARALLEL AXES IN PARKING T

Fanuc Alarm 1180 ALL PARALLEL AXES IN PARKING T Fanuc Alarm Description All of the axis specified for automatic operation are parked.

Fanuc Alarm 1298 ILLEGAL INCH/METRIC CONVERSION

Fanuc Alarm 1298 ILLEGAL INCH/METRIC CONVERSION Fanuc Alarm Description An error occurred during inch/metric switching.

Fanuc Alarm 1534 ADDRESS F OVERFLOW (G95)

Fanuc Alarm 1534 ADDRESS F OVERFLOW (G95) Fanuc Alarm Description The feedrate for the hole drilling axis calculated from the F and S codes is too fast in the feed…

Fanuc Alarm 1538 ADDRESS F OVERFLOW (OVERRIDE)

Fanuc Alarm 1538 ADDRESS F OVERFLOW (OVERRIDE) Fanuc Alarm Description The speed obtained by applying override to the F instruction is too fast.

Fanuc Alarm 1300 ILLEGAL ADDRESS

Fanuc Alarm 1300 ILLEGAL ADDRESS Fanuc Alarm Description The axis No. address was specified even though the parameter is not an axis–type while loading parameters or pitch error compensation data…

Fanuc Alarm 1301 MISSING ADDRESS

Fanuc Alarm 1301 MISSING ADDRESS Fanuc Alarm Description The axis No. was not specified even though the parameter is an axis–type while loading parameters or pitch error compensation data from…

Fanuc Alarm 1302 ILLEGAL DATA NUMBER

Fanuc Alarm 1302 ILLEGAL DATA NUMBER Fanuc Alarm Description A non–existent data No. was found while loading parameters or pitch error compensation data from a tape or by entry of…

Fanuc Alarm 1303 ILLEGAL AXIS NUMBER

Fanuc Alarm 1303 ILLEGAL AXIS NUMBER Fanuc Alarm Description An axis No. address exceeding the maximum number of controlled axes was found while loading parameters from a tape or by…

Fanuc Alarm 1333 DATA WRITE ERROR

Fanuc Alarm 1333 DATA WRITE ERROR Fanuc Alarm Description Could not write data while loading data from tape.

Fanuc Alarm 1508 DUPLICATE M-CODE (INDEX TABLE REVERSING) (M Series)

Fanuc Alarm 1508 DUPLICATE M-CODE (INDEX TABLE REVERSING) (M Series) Fanuc Alarm Description A function to which the same code as this M code is set exists. (index table indexing)

Fanuc Alarm 1509 DUPLICATE M-CODE (SPOS AXIS ORIENTATION) (T Series)

Fanuc Alarm 1509 DUPLICATE M-CODE (SPOS AXIS ORIENTATION) (T Series) Fanuc Alarm Description A function to which the same code as this M code is set exists. (spindle positioning, orientation)

Fanuc Alarm 1510 DUPLICATE M-CODE (SPOS AXIS POSITIONING) (T Series)

Fanuc Alarm 1510 DUPLICATE M-CODE (SPOS AXIS POSITIONING) (T Series) Fanuc Alarm Description A function to which the same code as this M code is set exists. (spindle positioning, positioning)

Fanuc Alarm 1511 DUPLICATE M-CODE (SPOS AXIS RELEASE) (T Series)

Fanuc Alarm 1511 DUPLICATE M-CODE (SPOS AXIS RELEASE) (T Series) Fanuc Alarm Description A function to which the same code as this M code is set exists. (spindle positioning, mode…

Fanuc Alarm 1533 ADDRESS F UNDERFLOW (G95)

Fanuc Alarm 1533 ADDRESS F UNDERFLOW (G95) Fanuc Alarm Description The feedrate for the hole drilling axis calculated from the F and S codes is too slow in the feed…

Fanuc Alarm 1596 EGB OVERFLOW (M Series)

Fanuc Alarm 1596 EGB OVERFLOW (M Series) Fanuc Alarm Description An overflow occurred in the calculation of the synchronization coefficient.

Fanuc Alarm 1805 ILLEGAL COMMAND

Fanuc Alarm 1805 ILLEGAL COMMAND Fanuc Alarm Description [I/O Device] An attempt was made to specify an illegal command during I/O processing on an I/O device. [G30 Reference Position Return]…

Fanuc Alarm 1806 DEVICE TYPE MISS MATCH

Fanuc Alarm 1806 DEVICE TYPE MISS MATCH Fanuc Alarm Description An operation not possible on the I/O device that is currently selected in the setting was specified. This alarm is…

Fanuc Alarm 1541 S-CODE ZERO

Fanuc Alarm 1541 S-CODE ZERO Fanuc Alarm Description “0” has been instructed as the S code.

Fanuc Alarm 1807 PARAMETER SETTING ERROR

Fanuc Alarm 1807 PARAMETER SETTING ERROR Fanuc Alarm Description An illegal I/O interface is specified. The external I/O device and baud rate, stop bit and protocol selection settings are erroneous.

Fanuc Alarm 1543 ILLEGAL GEAR SETTING (T Series)

Fanuc Alarm 1543 ILLEGAL GEAR SETTING (T Series) Fanuc Alarm Description The gear ratio between the spindle and position coder, or the set position coder number of pulses is illegal…

Fanuc Alarm 1544 S-CODE OVER MAX

Fanuc Alarm 1544 S-CODE OVER MAX Fanuc Alarm Description The S command exceeds the maximum spindle rotation number.

Fanuc Alarm 1594 EGB FORMAT ERROR (M Series)

Fanuc Alarm 1594 EGB FORMAT ERROR (M Series) Fanuc Alarm Description Error in the format of the block of an EGB command 1) T (number of teeth) is not specified…

Fanuc Alarm 1595 ILL-COMMAND IN EGB MODE (M Series)

Fanuc Alarm 1595 ILL-COMMAND IN EGB MODE (M Series) Fanuc Alarm Description During synchronization with the EGB, a command that must not be issued is issued. 1) Slave axis command…

Fanuc Alarm 1548 ILLGAL AXIS MODE

Fanuc Alarm 1548 ILLGAL AXIS MODE Fanuc Alarm Description The spindle positioning (T series) axis/Cs contour control axis was specified during switching of the controlled axis mode.

Fanuc Alarm 1561 ILLEGAL INDEXING ANGLE (M Series)

Fanuc Alarm 1561 ILLEGAL INDEXING ANGLE (M Series) Fanuc Alarm Description The specified angle of rotation is not an integer multiple of the minimum indexing angle.

Fanuc Alarm 1564 INDEX TABLE AXIS – OTHER AXIS SAME TIME (M Series)

Fanuc Alarm 1564 INDEX TABLE AXIS – OTHER AXIS SAME TIME (M Series) Fanuc Alarm Description The index table indexing axis and another axis have been specified in the same…