Sinumerik Alarm 20058 Channel %1 axis %2 revolutional feedrate: illegal feed source
Parameters:
%1 = Channel number
%2 = Axis name, spindle number
Definitions:
An axis/spindle is to be traversed at revolutional feedrate. The reference axis/spindle defined in SD 43300 ASSIGN_FEED_PER_REV_SOURCE refers to itself. The coupling caused cannot be executed.
Reactions:
– Alarm display.
Remedy:
The reference axis/spindle must be modified accordingly in SD 43300.
Program Continuation:
Alarm display showing cause of alarm disappears. No further operator action
References
- Siemens Diagnostics Guide by Siemens