Sinumerik CYCLE95

Siemens Sinumerik DIAMOF, DIAMON, DIAM90 Commands

Siemens Sinumerik DIAMOF, DIAMON, DIAM90 Commands

Sinumerik DIAMOF, DIAMON, DIAM90 CNC lathe X–axis (transverse axis) is programmed as diameter dimensioning. When necessary, it is possible to switch to radius dimensioning in the program. DIAMOF ; Radius…

Sinumerik CYCLE95 with Contour in Calling Program Example

Sinumerik CYCLE95 with Contour in Calling Program Example

;Siemens Sinumerik CYCLE95 first parameter NPP ;can be given as a sepatate routine or ;can be defined inside calling program with Labels ;stock removal contour is defined in the calling…

sinumerik CYCLE95 Facing Program CNC Lathe

Sinumerik CYCLE95 Facing Program CNC Lathe

G54 G53 G0 X610 Z350 T1 D1 G96 S250 M4 ; roughing tool G0 X65 Z0 G1 F0.18 X-1.6 G0 X65 Z5 CYCLE95(“CONT2”,1,0.02,0.05,0,0.3,0.1,0.12,10,0,0,0) G0 X200 Z100 M30 Contour subprogram: CONT2…

Siemens Sinumerik CYCLE95 Program Outside Turning Example

Siemens Sinumerik CYCLE95 Program Outside Turning Example

G54 G53 G0 X610 Z350 T1 D1 G96 S250 M4 G0 X65 Z0 G1 F0.18 X-1.6 G0 X65 Z5 CYCLE95(“CONT1”,3,0.05,0.3,0,0.3,0.1,0.12,9,0,0,0) G0 X200 Z100 M30 Contour subprogram: CONTI: G1 X38 Z2…

Sinumerik CYCLE95 Inside Turning Program Example

Sinumerik CYCLE95 Inside Turning Program Example

G54 G53 G0 X610 Z350 T5 D1 G96 S250 M4 ; boring bar CYCLE95(“CONT3”,3,0.05,0.3,0,0.3,0.1,0.12,11,0,0,0) G0 X200 Z100 M30 Contour subprogram: CONT3 G1 X40 Z0 F0.12 X38 Z-2.5 Z-10 X40 Z-12.5…