Okuma Alarm-B 2672 C-axis sync command format


Okuma Alarm-B 2672 C-axis sync command format
Specified C-axis sync command was illegal.

Object
Axis name or none (spindle)

Character-string
None

Code
1->Order besides M888 in the sync. side when C-axis sync. mode (M889/M890)
2->A/B Turret different oder M889-M890
3->B-Turret oder M890 when A-Turret M889, A-Turret oder M890 when B-Turret M889
4-> Oder M888-M890 with M110
5->When there was one side on G122/G123 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, G122/G123 instructions were already accepted on another side.
6->When there was one side on G140/G141 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, G140/G141 instructions were already accepted on another side.
7->When there was one side on G144/G145 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, G144/G145 instructions were already accepted on another side.
8->When there was one side on G116/G117 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, G116/G117 instructions were already accepted on another side.
9->When there was one side on M100 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, M100 instructions were already accepted on another side.
10->When there was one side on P-Code instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, P-Code instructions were already accepted on another side.
11->When there was one side on VEINT instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, VEINT instructions were already accepted on another side.
12->When there was one side on M02 instruction receipt conditions, M888-M890 instructions were already performed on another side. Or,when there was one side on a synchronism standby condition of M888-M890 instructions, M02 instructions were already accepted on another side.
13->Concerning sequence carriage return, when there is one side on a synchronization wait state of M888-M890 instructions, another side has reached a carriage return frock.
14->Oder M890 when 1S specification
15->Oder M891/M892 when 2S specification
16->Oder M892 when C-axis is not connected
17->Restart Command is executed when M110/M892 mode.
18->M110/M892 ordered when it has reached a return block of sequent return.
19->The tool retract cycle was ordered on M892/M889/M890 mode.
20->RTI is executed when M892/M889/M890 mode.
21->M888-M890 of the restart return block is different to now M888-M890.
22->It instructed in M110/M892 in the place where the Main/Sub spindle does not pass a marker and, Main/Sub chuck is unclamped.

Probable Faulty Locations
Part program error

Measures to Take
Place applicable to above-mentioned code is modified.

Okuma Alarm-B 2672 C-axis sync command format