Okuma Alarm-B 2194 MCS ABSO SCALE sub-slider error


Okuma Alarm-B 2194 MCS ABSO SCALE sub-slider error
ERROR occurred by sub-slider of absoscale for the transfer spec.
[Index]
Axis or None

Character-string
None

Code
XXYYZZZZ
XX E-link sequence number in detecting error

0:Reset
1:Net address setting
2:Communucation basis information demand
3:Change of communucation version.
4:Device information acquisition.
5:Change of parameter.
6:AT mode start

YY Error contents

0:Communication error
1:Transmission start timeover
2:Transmission complete timeover
3:Reception complete timeover
4:Response address error
5:Response code error
6:Paremeter error

ZZZZ Data

YY=0:E-link error status in detecting error C2ERR
YY=1,2,3:Transmitting frame information QC2MTINF
YY=4:Net address of response-device
YY=5:Receiving frame information QC2RXINF
YY=6:The number of showing parameter which detected error
1=Shortage of the number of receiving parameter
2=Incongruousness of Communucation basis information
3=Incongruousness of many rotation detection range
Okuma Alarm-B 2194 MCS ABSO SCALE sub-slider error