Haas Settings

Haas Settings are Haas machine conditions that have an affect on machine operation.

Haas Setting 146-154 APC Pallet Settings – Haas Mill

Haas Setting 146-154 APC Pallet Settings 146 APC Pallet 3 Load X 147 APC Pallet 3 Load Y 148 APC Pallet 3 Unload X 149 APC Pallet 3 Unload Y…

Haas Setting 121-129 APC Pallet Settings – Haas Mill

Haas Setting 121-129 APC Pallet Settings 121 APC Pal. One Load X 122 APC Pal. One Load Y 123 APC Pal. One Unload X 124 APC Pal. One Unload Y 125 APC…

Haas Setting 158,159,160 XYZ Screw Thermal COMP%

Haas Setting 158,159,160 XYZ Screw Thermal COMP% Haas Setting Description These settings can be set from -30 to +30 and will adjust the existing screw thermal compensation by -30% to…

Haas Setting 167-186 Periodic Maintenance

Haas Setting 167-186 Periodic Maintenance Haas Setting Description There are 14 items that can be monitored, as well as six spare items, in the periodic maintenance settings. These settings will allow…

Haas Setting 163 Disable .1 Jog Rate

Haas Setting 163 Disable .1 Jog Rate Haas Setting Description This setting disables the highest jog rate.If the highest jog rate is selected, the next lower rate is automatically selected…

Haas Setting 162 Default to Float – Haas Lathe

Haas Setting 162 Default to Float Haas Setting Description When this setting is On, the control will add a decimal point to values entered without a decimal point (for certain…

Haas Setting 162 Default to Float – Haas Mill

Haas Setting 162 Default to Float Haas Setting Description When this setting is ON, the control will add a decimal point to values entered without a decimal point (for certain address…

Haas Setting 157 Offset Format Type

Haas Setting 157 Offset Format Type Haas Setting Description This setting controls the format in which offsets are saved with programs. When it is set to A the format looks…

Haas Setting 191 Default Smoothness – Haas Mill

Haas Setting 191 Default Smoothness Haas Setting Description This setting may be set to ROUGH, MEDIUM, or FINISH and uses parameters 302, 303, 314, 749, and 750-754 and G187 to…

Haas Setting 187 Machine Data Echo

Haas Setting 187 Machine Data Echo Haas Setting Description This setting can be set ON or OFF.When set to ON, the data collection Q commands issued from the user’s PC…

Haas Setting 155 Load Pocket Tables – Haas Mill

Haas Setting 155 Load Pocket Tables Haas Setting Description This setting should only be used when a software upgrade is performed and/or memory has been cleared and/or the control is…

Haas Setting 166 SSV CYCLE (0.1) SECS – Haas Lathe

Haas Setting 166 SSV CYCLE (0.1) SECS Haas Setting Description Specifies the duty cycle, or the rate of change of Spindle Speed. Positive value only.

Haas Setting 165 SSV Variation – Haas Lathe

Haas Setting 165 SSV Variation Haas Setting Description Specifies the amount by which to allow the RPM to vary above and below its commanded value during the use of the…

Haas Setting 164 Rotary Increment – Haas Mill

Haas Setting 164 Rotary Increment Haas Setting Description This setting applies to the Rotary Index button on the EC300. It specifies the rotation for the rotary table in the load…

Haas Setting 164 Power up SP Max RPM – Haas Lathe

Haas Setting 164 Power up SP Max RPM Haas Setting Description This setting is used to clamp the spindle speed each time the machine is powered on. It causes a…

Haas Setting 156 Save Offset with PROG

Haas Setting 156 Save Offset with PROG Haas Setting Description Turning this setting ON will have the control save the offsets in the same file as the programs, but under…

Haas Setting 28 Can Cycle Act w/o X/Z – Haas Lathe

Haas Setting 28 Can Cycle Act w/o X/Z Haas Setting Description Turning this setting On will cause the commanded canned cycle to complete without an X or Z command. The…

Haas Setting 101 Feed Overide -> Rapid

Haas Setting 101 Feed Overide -> Rapid Haas Setting Description Turning this setting ON and pressing Handle Control Feedrate will cause, the jog handle to effect both the feedrate and…

Haas Setting 104 Jog Handl to SNGL BLK

Haas Setting 104 Jog Handl to SNGL BLK Haas Setting Description The jog handle can be used to single-step through a program when this setting is ON. Reversing the jog…

Haas Setting 108 Quick Rotary G28 – Haas Mill

Haas Setting 108 Quick Rotary G28 Haas Setting Description Turning this setting ON will return the rotary unit back to zero using the shortest distance. For example if the rotary…

Haas Setting 109 Warmup Time in Min.

Haas Setting 109 Warmup Time in Min. Haas Setting Description This is the number of minutes (up to 300 minutes from power-up) during which the compensations specified in Settings 110-112…

Haas Setting 110-112 Warmup Distance – Haas Mill

Haas Setting 110 Warm up X Distance Haas Setting 111 Warm up Y Distance Haas Setting 112 Warm up Z Distance Haas Setting Description Settings 110, 111 and 112 specify…

Haas Setting 114 115 Conveyor Cycle Time – Conveyor On-time (Minutes)

Haas Setting 114 Conveyor Cycle Time (Minutes) Haas Setting 115 Conveyor On-time (Minutes) Haas Setting Description These two settings control the optional chip conveyor. Setting 114 controls how often the…

Haas Setting 116 Pivot Length – Haas Mill

Haas Setting 116 Pivot Length Haas Setting Description Setting 116 is set when the machine is first built and never changed. Only a qualified service technician should modify this setting.

Haas Setting 133 Repeat Rigid Tap

Haas Setting 133 Repeat Rigid Tap Haas Setting Description This setting ensures that the spindle is oriented during tapping so that the threads will line up when a second tapping…

Haas Setting 134 Connection Type

Haas Setting 134 Connection Type Haas Setting Description This setting can be FLOPPY, NET, or ZIP. When it is set to FLOPPY, loading and saving programs is performed using the…

Haas Setting 135 Network Type

Haas Setting 135 Network Type Haas Setting Description This setting can be NONE, NOVELL, NT/IPX, NT/TCP or ADV/TCP. It specifies the user-supplied network connection type. When it is set to…

Haas Setting 137 Username

Haas Setting 137 Username Haas Setting Description This setting contains the user-entered account name (up to 8 characters long.) Enter a semicolon (EOB symbol) if the machine is not linked…

Haas Setting 138 Password

Haas Setting 138 Password Haas Setting Description This setting contains the user-entered password (up to 8 characters long.) Enter a semicolon (EOB symbol) if the machine is not linked to…

Haas Setting 139 Path

Haas Setting 139 Path Haas Setting Description This setting contains the user-entered Novell-Path or Windows NT root directory name (up to 18 characters long). For a Novell network, this is…

Haas Setting 140 TCP/IP ADDR

Haas Setting 140 TCP/IP ADDR Haas Setting Description This setting is used only for TCP networks and contains the user-entered TCP/IP address in the server domain (up to 15 characters…

Haas Setting 141 Subnet Mask

Haas Setting 141 Subnet Mask Haas Setting Description This setting is used only for TCP networks and contains the user-entered subnet mask (up to 15 characters long; for example, 255.255.255.0)….

Haas Setting 117 G143 Global Offset – Haas Mill

Haas Setting 117 G143 Global Offset Haas Setting Description This setting is provided for customers who have several 5-axis Haas mills and want to transfer the programs and tools from…

Haas Setting 142 Offset CHNG Tolerance

Haas Setting 142 Offset CHNG Tolerance Haas Setting Description This setting generates a warning message if an offset is changed by more than the amount entered for this setting. The…

Haas Setting 118 M99 Bumps M30 CNTRS

Haas Setting 118 M99 Bumps M30 CNTRS Haas Setting Description When this setting is ON, an M99 will add one to the M30 counters (these are visible on the CURNT…